Verified specifications
| Horsepower | 10 HP |
|---|---|
| Speed | 1180 RPM |
| Voltage | 208-230/460V, three-phase, 60 Hz |
| Frame | 256T |
| Enclosure | TEFC |
| Full-load amps | 30.0A @208V / 28.4A @230V / 14.2A @460V |
| Efficiency | 91.0% |
| Service factor | 1.15 |
| Code letter | J |
| NEMA design | A |
| Power factor | 72 |
| Insulation | Class F |
| Shaft | 1.625" |
| Bearings | 6309 / 6208 |
| Weight | 351 lb |
| Inverter rated | Yes |
| Duty | IEEE 841 severe duty + Division II XP rated — never "general purpose" |
Super-E Chemical Processing family: cast iron, TEFC, inverter duty, Class I Div 2. These are not general-purpose motors.
Full-load amps per baldor.com — an early reseller figure (12.4/6.2A) was wrong and is not used here.
General-purpose twin: the Baldor EM2332T carries the same 10 HP / 1180 RPM / 256T ratings in standard duty.
Confirming the right replacement
Before we quote, compare these fields on your failed motor's nameplate. If any of them differ, send us a photo of the nameplate and we'll match it exactly rather than guessing:
- Full model number — including any suffix letters
- HP, RPM, and voltage
- Frame size (e.g. 284T) and enclosure (TEFC, ODP, etc.)
- Full-load amps
Other Baldor models
- More Baldor modelsBrowse every Baldor model page we quote
- Baldor ECP84102T-420 HP, 1175 RPM, 286T TEFC IEEE 841 severe duty
- Baldor CECP2334T20 HP, 1770 RPM, 256TC TEFC/IP55 IEEE 841 severe duty
- Baldor CECP84314T-460 HP, 1780 RPM, 364TC TEFC/IP56 IEEE 841 severe duty
Need a Baldor ECP2332T?
Send the nameplate off your failed unit. We'll confirm the match and quote the ECP2332T or a verified equivalent with availability and lead time.
Quote this motor