Verified specifications
| Catalog number | 7FD1056 |
|---|---|
| Horsepower | 1/2 HP |
| Speed | 1075 RPM (3 speeds) |
| Voltage | 277V, single-phase, 60 Hz |
| Frame | 48Y |
| Enclosure | Open Enclosed (OAO) |
| Duty | Air Over |
| Full-load amps | 2.2 A |
| Service factor | 1.0 |
| Insulation class | B |
| Rotation | Reversible |
| Shaft | 1/2 in. dia. x 6.4 in. extension, flat |
| Bearings | Sleeve / Sleeve |
| Mounting | Resilient ring / extended studs |
| Motor type | Permanent split capacitor (PSC) |
| Thermal protection | Automatic |
| Max ambient | 50°C |
| Approvals | UL Recognized, CSA Certified |
The 7FD1056 is the 1/2 HP companion to the 1/4 HP 7FD1026 — same 277V, 3-speed, 48Y Air Over design with a longer frame. Note the sleeve bearings here versus the ball bearings on the 7FD1026.
Confirming the right replacement
Before we quote, compare these fields on your failed motor's nameplate. If any of them differ, send us a photo of the nameplate and we'll match it exactly rather than guessing:
- Full model number — including any suffix letters
- HP, RPM, and voltage
- Frame size (e.g. 284T) and enclosure (TEFC, ODP, etc.)
- Full-load amps
Other Century models
- More Century modelsBrowse every Century model page we quote
- Century FDL6002A3/4–1/5 HP multi-HP, 1075 RPM, 48 direct-drive blower
Need a Century 7FD1056?
Send the nameplate off your failed unit. We'll confirm the match and quote the 7FD1056 or a verified equivalent with availability and lead time.
Quote this motor